TLC271IDR

1 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC271IDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 343
Description: 1 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	725mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLC271
Pin Count	8
Number of Channels	1
Operating Supply Current	950μA
Nominal Supply Current	2mA
Power Dissipation	725mW
Slew Rate	5.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	4V~16V ±2V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	10mV
Bandwidth	1.7MHz
Gain Bandwidth Product	2.2MHz
Unity Gain BW-Nom	2000 kHz
Voltage Gain	87.23dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	YES
Nominal Gain Bandwidth Product	1.7MHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC271IDR Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . As long as the supply current of the chip does not exceed 950μA, this op amp ic can operate. There should be no change in the voltage gain at 87.23dB. 1 channels are available on the instrumentation amplifier. The linear amplifier is packaged by using a TR axis. In this case, LinCMOS? represents the instrumentation amplifiers' series number.