TLC271MDR

30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 5V~16V ±2.5V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC271MDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 273
Description: 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 5V~16V ±2.5V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-55°C~125°C
Packaging	Tape & Reel (TR)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLC271
Pin Count	8
Number of Elements	1
Operating Supply Current	950μA
Nominal Supply Current	2mA
Power Dissipation	725mW
Slew Rate	5.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	5V~16V ±2.5V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	10mV
Bandwidth	1.7MHz
Gain Bandwidth Product	2.2MHz
Unity Gain BW-Nom	2000 kHz
Voltage Gain	87.23dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	YES
Nominal Gain Bandwidth Product	1.7MHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free

TLC271MDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 10mV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. This op amp can operate from a supply current at 950μA. Keeping the voltage gain at 87.23dB is the best course of action. For the operating supply voltage of the op amp ic, there is a rating of 1. To pack the operational amplifier ics, TR is adopted as the packing method. As the name implies, LinCMOS? refers to the series of the buffer op amp.