banner_page

TLC272ACP

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC272 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC272ACP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 599
  • Description: 2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC272 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position DUAL
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC272
Pin Count 8
Power Supplies 3/16V
Number of Channels 2
Operating Supply Current 1.9mA
Nominal Supply Current 4mA
Power Dissipation 1W
Slew Rate 5.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 3V~16V ±1.5V~8V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 900μV
Bandwidth 1.7MHz
Gain Bandwidth Product 2.2MHz
Unity Gain BW-Nom 2000 kHz
Voltage Gain 87.23dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 1.7MHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC272ACP Overview


Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 900μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 1.9mA supply current, this operational amplifier ics can be operated. Maintain 87.23dB as the voltage gain. Instrumentation amplifier has 2 channels on it. Buffer op amp series numbers are indicated by the LinCMOS?.

TLC272ACP Features


8 Pins
supply voltage of 5V
87.23dB voltage gain

TLC272ACP Applications


There are a lot of Texas Instruments TLC272ACP Instrumentational OP Amps applications.

  • Laptop
  • High-frequency data acquisition systems
  • Scintillation detectors
  • Test and measurement instruments
  • Gaming industry
  • Comparator
  • Tablets
  • Exponential operation circuits
  • Ultrasound transducers
  • Integrator circuits

Write a review

Note: HTML is not translated!
    Bad           Good