banner_page

TLC272AIDR

30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC272 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC272AIDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 248
  • Description: 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC272 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TR
Max Power Dissipation 725mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC272
Pin Count 8
Number of Elements 2
Power Supplies 4/16V
Operating Supply Current 1.4mA
Nominal Supply Current 4mA
Power Dissipation 725mW
Slew Rate 5.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 4V~16V ±2V~8V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 5mV
Bandwidth 320 kHz
Gain Bandwidth Product 2.2MHz
Unity Gain BW-Nom 2000 kHz
Voltage Gain 87.23dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 900μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 1.7MHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC272AIDR Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. The input offset voltage is 5mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. An 1.4mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 87.23dB for the time being. The linear amplifier consists of 2 different elements in total. For packing the buffer amplifier, the TR-axis is adopted. LinCMOS? corresponds to the op amp's series.

TLC272AIDR Features


8 Pins
supply voltage of 5V
87.23dB voltage gain

TLC272AIDR Applications


There are a lot of Texas Instruments TLC272AIDR Instrumentational OP Amps applications.

  • High gain DC amplifier
  • Signal transformation
  • ECG equipment
  • Medical instruments
  • Video computer boards
  • Signal amplification
  • Power generator
  • Portable docking station
  • Test equipment
  • Precision measurement

Write a review

Note: HTML is not translated!
    Bad           Good