TLC272CP
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 10mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC272 |
| Pin Count | 8 |
| Power Supplies | 3/16V |
| Number of Channels | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1W |
| Max Supply Current | 3.2mA |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 87.23dB |
TLC272CP Description
The TLC272CP precision dual operational amplifier offers a wide variety of input offset voltage grades, as well as minimal offset voltage drift, high input impedance, low noise, and speeds comparable to general-purpose BiFET devices. Internal ESD protection circuits in the TLC272CP pinout avoid functional failures at voltages up to 2000 V, as measured by MIL-STD-883C, Method 3015.2.
Many of the characteristics of bipolar technology are available on LinCMOSTM operational amplifiers without the power drawbacks of chevalier technology. TheTLC272CP amplifier makes it simple to create general applications including transducer interfaces, analog computations, amplifier blocks, active filters, and signal buffering.
TLC272CP Features
Operation with a Single Source of Supply
Common-Mode Below the Negative Rail, the Input Voltage Range Extends (C-Suffix, I-Suffix types)
Low-noise
Typically 25 nV/Hz at f = 1 kHz
Output Voltage Range Includes Negative Rail
High Input impedance
1012 Typ
ESD-Protection Circuitry
Small-Outline Package Option Also Available in Tape and Reel
Designed-In Latch-Up Immunity
Trimmed Offset Voltage:
TLC277 . . . 500 uV Max at 25°C, VDD = 5 V
Input Offset Voltage Drift ...Typically 0.1 uV/Month, Including the First 30 Days
Wide Range of Supply Voltages Over Specified Temperature Range:
0°C to 70°C ...3 V to 16 V
–40°C to 85°C ...4 V to 16 V
–55°C to 125°C ...4 V to 16 V
TLC272CP Applications
transducer interfacing
analog calculations
amplifier blocks
active filters
The TLC272CP precision dual operational amplifier offers a wide variety of input offset voltage grades, as well as minimal offset voltage drift, high input impedance, low noise, and speeds comparable to general-purpose BiFET devices. Internal ESD protection circuits in the TLC272CP pinout avoid functional failures at voltages up to 2000 V, as measured by MIL-STD-883C, Method 3015.2.
Many of the characteristics of bipolar technology are available on LinCMOSTM operational amplifiers without the power drawbacks of chevalier technology. TheTLC272CP amplifier makes it simple to create general applications including transducer interfaces, analog computations, amplifier blocks, active filters, and signal buffering.
TLC272CP Features
Operation with a Single Source of Supply
Common-Mode Below the Negative Rail, the Input Voltage Range Extends (C-Suffix, I-Suffix types)
Low-noise
Typically 25 nV/Hz at f = 1 kHz
Output Voltage Range Includes Negative Rail
High Input impedance
1012 Typ
ESD-Protection Circuitry
Small-Outline Package Option Also Available in Tape and Reel
Designed-In Latch-Up Immunity
Trimmed Offset Voltage:
TLC277 . . . 500 uV Max at 25°C, VDD = 5 V
Input Offset Voltage Drift ...Typically 0.1 uV/Month, Including the First 30 Days
Wide Range of Supply Voltages Over Specified Temperature Range:
0°C to 70°C ...3 V to 16 V
–40°C to 85°C ...4 V to 16 V
–55°C to 125°C ...4 V to 16 V
TLC272CP Applications
transducer interfacing
analog calculations
amplifier blocks
active filters
