TLC274AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC274 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 950mW |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 320 kHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC274AIDR Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.8mA and 10 . Keeping the voltage gain at 87.23dB is the best course of action. Op amp has total of 4 elements. To pack the operational amplifier ics, TR is adopted as the packing method. The LinCMOS? stands for the buffer op amp's serial number.
TLC274AIDR Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274AIDR Applications
There are a lot of Texas Instruments TLC274AIDR Instrumentational OP Amps applications.
- Active probe
- Switching amplifier
- Biopotential
- Information processing
- Video computer boards
- Cinema or auditorium audio system
- Displayers for aircraft and air transportation control systems
- Gaming industry
- High/low-pass filter circuit
- Differentiator circuits
