Parameters |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLC274 |
Pin Count |
14 |
Number of Elements |
4 |
Operating Supply Current |
3.8mA |
Nominal Supply Current |
8mA |
Power Dissipation |
1.575W |
Slew Rate |
5.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
4V~16V ±2V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
1.7MHz |
Gain Bandwidth Product |
2.2MHz |
Unity Gain BW-Nom |
2000 kHz |
Voltage Gain |
87.23dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
900μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.7MHz |
Max I/O Voltage |
5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
TLC274AIN Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. The number of terminations is approaching the 14 mark. Buffer amplifier has a total of 14 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 3.8mA. It is recommended to keep the voltage gain at 87.23dB at all times. There are a total of 4 elements in this linear amplifier. The LinCMOS? indicates the series number of the op amp.
TLC274AIN Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274AIN Applications
There are a lot of Texas Instruments TLC274AIN Instrumentational OP Amps applications.
- Power generator
- Logarithmic operation circuits
- Car stereo
- Digital cameras
- Broadcasting
- Polarized electrodes
- Portable electronic products powered by batteries
- Fast A/D and D/A converters
- Signal transformation
- Signal amplification