TLC274BCN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC274 |
| Pin Count | 14 |
| Power Supplies | 3/16V |
| Number of Channels | 4 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.575W |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC274BCN Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 2mV for this buffer op amp. This electronic part is recommended for mounting type Through Hole. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 3.8mA and 10 . There should be no change in the voltage gain. There are 4 channels on the operational amplifiers. LinCMOS? corresponds to linear amplifier's series.
TLC274BCN Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274BCN Applications
There are a lot of Texas Instruments TLC274BCN Instrumentational OP Amps applications.
- Power transmission
- Division circuits
- Active probe
- Non-polarized electrodes
- Portable docking station
- Weighing systems
- Video data acquisition
- RF cable systems
- Ultrasound transducers
- Video computer boards
