TLC274IN

4 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC274 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC274IN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 209
Description: 4 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC274 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Base Part Number	TLC274
Pin Count	14
Number of Channels	4
Operating Supply Current	3.8mA
Nominal Supply Current	8mA
Power Dissipation	1.575W
Slew Rate	5.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	4V~16V ±2V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	10mV
Bandwidth	1.7MHz
Gain Bandwidth Product	2.2MHz
Unity Gain BW-Nom	2000 kHz
Voltage Gain	87.23dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	18V
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	1.7MHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC274IN Overview

There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 10mV voltage. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 3.8mA can be used to operate this linear amplifier. Voltage gain should remain at 87.23dB. The op amp ic has 4 channels on it. Buffer op amp series numbers are indicated by the LinCMOS?.