banner_page

TLC277IDR

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC277 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC277IDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 461
  • Description: 2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC277 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Output Current per Channel 30mA
Input Offset Voltage (Vos) 500μV
Bandwidth 1.7MHz
Gain Bandwidth Product 2.2MHz
Unity Gain BW-Nom 320 kHz
Voltage Gain 87.23dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 250μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 1.7MHz
Max I/O Voltage 500μV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC277
Pin Count 8
Power Supplies 4/16V
Number of Channels 2
Operating Supply Current 1.9mA
Nominal Supply Current 4mA
Power Dissipation 725mW
Slew Rate 5.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 4V~16V ±2V~8V

TLC277IDR Overview


Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. Op amp ic rates 500μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. Operational amplifier can operate supply current at 1.9mA. Voltage gain should remain at 87.23dB. There are 2 channels on the operational amplifiers. To pack the operational amplifier ics, TR is adopted as the packing method. Buffer op amp series numbers are indicated by the LinCMOS?.

TLC277IDR Features


8 Pins
supply voltage of 5V
87.23dB voltage gain

TLC277IDR Applications


There are a lot of Texas Instruments TLC277IDR Instrumentational OP Amps applications.

  • Proportional counter tubes
  • Logarithmic operation circuits
  • Band-stop filter
  • Signal amplification
  • Band-pass filter
  • Exponential operation circuits
  • Commercial audio systems
  • Test and measurement instruments
  • Medical imaging
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good