TLC279CDRG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 14 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Number of Elements | 4 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 950mW |
| Slew Rate | 3.6 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 600pA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 1.7MHz |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 900μV |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC279CDRG4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 900μV. An 3.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 87.23dB. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. Instrumentation amplifier shouldn't be used above 85°C . A voltage rating of 4 is indicated for the op amp's operating supply voltage. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. Keeping the linear amplifier's supply voltage above 3V is recommended.
TLC279CDRG4 Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC279CDRG4 Applications
There are a lot of Texas Instruments TLC279CDRG4 Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Comparator
- Displayers for aircraft and air transportation control systems
- Blood pressure sensors
- Automation control systems
- High gain DC amplifier
- Radiation thermometry transducers
- earphone
- Automotive sensors
- Fission chambers
