TLC279CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.575W |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC279 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 3/16V |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.575W |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 320 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 370μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 900μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC279CN Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 14 pins on this chip. The input offset voltage is 900μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at 0°C~70°C. As long as the supply current of the chip does not exceed 3.8mA, this op amp ic can operate. Maintain 87.23dB as the voltage gain. There are a total of 4 elements in this linear amplifier. The LinCMOS? stands for the buffer op amp's serial number.
TLC279CN Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC279CN Applications
There are a lot of Texas Instruments TLC279CN Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Home audio systems
- PDA
- Radiation thermometry transducers
- Biopotential
- Video computer boards
- Precision measurement
- Strain gauges
- Band-stop filter
- Tablets
