TLC27L2AIP

30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 4V~16V ±2V~8V TLC27 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC27L2AIP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 765
Description: 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 4V~16V ±2V~8V TLC27 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	1W
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC27
Pin Count	8
Number of Elements	2
Power Supplies	4/16V
Operating Supply Current	29μA
Nominal Supply Current	46μA
Power Dissipation	1W
Slew Rate	0.05V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	4V~16V ±2V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	5mV
Bandwidth	85 kHz
Gain Bandwidth Product	110kHz
Unity Gain BW-Nom	130 kHz
Voltage Gain	113.62dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	900μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	85 kHz
Max I/O Voltage	5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC27L2AIP Overview

In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 29μA volt supply current is needed for this linear amplifier to operate. 113.62dB should remain the voltage gain. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. Buffer op amp series numbers are indicated by the LinCMOS?.