TLC27L2BCP
| Parameters | |
|---|---|
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC27 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 3/16V |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Power Dissipation | 1W |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 116.9dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 235μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
TLC27L2BCP Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2mV voltage. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . The voltage gain should stay at 116.9dB. The total number of elements in this buffer amplifier is 2. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC27L2BCP Features
8 Pins
supply voltage of 5V
116.9dB voltage gain
TLC27L2BCP Applications
There are a lot of Texas Instruments TLC27L2BCP Instrumentational OP Amps applications.
- Automotive sensors
- Navigation
- Industrial applications including automation
- Wireless base stations
- Strain gauges
- Test and measurement instruments
- Active probe
- Communication device
- Car stereo
- Hand-held batteries
