Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC27 |
Pin Count |
8 |
Number of Elements |
2 |
Power Supplies |
4/16V |
Operating Supply Current |
29μA |
Nominal Supply Current |
46μA |
Power Dissipation |
1W |
Slew Rate |
0.05V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
4V~16V ±2V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
85 kHz |
Gain Bandwidth Product |
110kHz |
Unity Gain BW-Nom |
85 kHz |
Voltage Gain |
113.62dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
235μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
85 kHz |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC27L2BIP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. Op amp ic rates 2mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 29μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 113.62dB. There are 2 elements in total in this linear amplifier. The LinCMOS? represents the op amp's series number.
TLC27L2BIP Features
8 Pins
supply voltage of 5V
113.62dB voltage gain
TLC27L2BIP Applications
There are a lot of Texas Instruments TLC27L2BIP Instrumentational OP Amps applications.
- Wireless base stations
- High gain DC amplifier
- Thermocouples
- Video data acquisition
- Power control
- Strain gauges
- Television
- Differentiator circuits
- Division circuits
- Signal amplification