TLC27L2CDR

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC27 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC27L2CDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 752
Description: 2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC27 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC27
Pin Count	8
Power Supplies	3/16V
Number of Channels	2
Operating Supply Current	29μA
Nominal Supply Current	46μA
Power Dissipation	725mW
Slew Rate	0.05V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	3V~16V ±1.5V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	10mV
Bandwidth	85 kHz
Gain Bandwidth Product	110kHz
Unity Gain BW-Nom	85 kHz
Voltage Gain	116.9dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	85 kHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC27L2CDR Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 10mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . A supply current of 29μA can be used to operate this linear amplifier. Keeping the voltage gain at 116.9dB is the best course of action. 2 channels are available on the instrumentation amplifier. The linear amplifier is packaged by using a TR axis. LinCMOS? is the number that corresponds to the series of the buffer op amp.