TLC27L2IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC27 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 4/16V |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 34μA |
| Power Dissipation | 725mW |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 113.62dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 10mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27L2IDG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. The input offset voltage is 10mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 29μA can be used to operate this linear amplifier. You should keep the voltage gain at 113.62dB for the time being. The linear amplifier consists of 2 different elements in total. LinCMOS? corresponds to linear amplifier's series.
TLC27L2IDG4 Features
8 Pins
supply voltage of 5V
113.62dB voltage gain
TLC27L2IDG4 Applications
There are a lot of Texas Instruments TLC27L2IDG4 Instrumentational OP Amps applications.
- Communication
- Inverse/same-phase proportional circuit
- Instrumentation
- Broadcasting
- Multimedia playback equipment
- Medical imaging
- Tablets
- Gaming industry
- Communication device
- pH (acidity)
