TLC27L4ACD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Power Supplies | 5/10V |
| Number of Channels | 4 |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 92μA |
| Power Dissipation | 950mW |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 110 kHz |
| Voltage Gain | 114.32dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 5mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27L4ACD Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 10V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. There is an input offset voltage of 5mV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using a supply current of 57μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 114.32dB. There are a total of 4 channels available on the op amps. Buffer op amp series numbers are indicated by the LinCMOS?.
TLC27L4ACD Features
14 Pins
supply voltage of 10V
114.32dB voltage gain
TLC27L4ACD Applications
There are a lot of Texas Instruments TLC27L4ACD Instrumentational OP Amps applications.
- Video amplifiers
- E-book readers
- Cinema or auditorium audio system
- ECG equipment
- Ultrasound transducers
- Proportional counter tubes
- Differentiator circuits
- Multiplication circuits
- Radar
- Image computer boards
