Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
10V |
Base Part Number |
TLC27 |
Pin Count |
14 |
Number of Elements |
4 |
Power Supplies |
5/10V |
Operating Supply Current |
57μA |
Nominal Supply Current |
92μA |
Power Dissipation |
1.575W |
Slew Rate |
0.05V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
4V~16V ±2V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
85 kHz |
Gain Bandwidth Product |
110kHz |
Unity Gain BW-Nom |
110 kHz |
Voltage Gain |
113.62dB |
Average Bias Current-Max (IIB) |
0.002μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
900μV |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
85 kHz |
Max I/O Voltage |
5mV |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC27L4AIN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 10V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Operational amplifier can operate supply current at 57μA. You should keep the voltage gain at 113.62dB for the time being. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. The LinCMOS? represents the op amp's series number.
TLC27L4AIN Features
14 Pins
supply voltage of 10V
113.62dB voltage gain
TLC27L4AIN Applications
There are a lot of Texas Instruments TLC27L4AIN Instrumentational OP Amps applications.
- Industrial applications including automation
- Signal operation
- Fast A/D and D/A converters
- Communication
- Wireless base stations
- earphone
- Scintillation detectors
- High-frequency data acquisition systems
- Mobile phone
- Video conversion and routing