TLC27L4BCDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 5/10V |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 92μA |
| Power Dissipation | 950mW |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.32dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 2mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27L4BCDR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 14 mark. There are a total of 14 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. There is an input offset voltage of 2mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using an 57μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 114.32dB at all times. The total number of elements in this buffer amplifier is 4. It is used TR to pack the op amps. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLC27L4BCDR Features
14 Pins
supply voltage of 5V
114.32dB voltage gain
TLC27L4BCDR Applications
There are a lot of Texas Instruments TLC27L4BCDR Instrumentational OP Amps applications.
- Comparator
- Digital cameras
- High input resistance broadband
- Power transmission
- Signal filtering
- Medical imaging
- Tablets
- Power generator
- Automatic control
- Hand-held batteries
