TLC27L4BCN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Power Supplies | 5/10V |
| Number of Channels | 4 |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 92μA |
| Power Dissipation | 1.575W |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.32dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 2mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27L4BCN Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. It is important to remember that this op amp should be operated at a voltage of 10V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 2mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 57μA. Voltage gain should remain at 114.32dB. There are 4 channels on the operational amplifiers. The LinCMOS? represents the op amp's series number.
TLC27L4BCN Features
14 Pins
supply voltage of 10V
114.32dB voltage gain
TLC27L4BCN Applications
There are a lot of Texas Instruments TLC27L4BCN Instrumentational OP Amps applications.
- Power transmission
- Proportional counter tubes
- single/dual op amp sum and difference circuits
- Exponential operation circuits
- Communication
- Digital cameras
- Non-polarized electrodes
- Video amplifiers
- Communication device
- PDA
