TLC27L4CN

4 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC27 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC27L4CN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 825
Description: 4 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC27 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	0°C~70°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	10V
Base Part Number	TLC27
Pin Count	14
Power Supplies	5/10V
Number of Channels	4
Operating Supply Current	57μA
Nominal Supply Current	92μA
Power Dissipation	1.575W
Slew Rate	0.05V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.7pA
Voltage - Supply, Single/Dual (±)	3V~16V ±1.5V~8V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	10mV
Bandwidth	65 kHz
Gain Bandwidth Product	110kHz
Unity Gain BW-Nom	85 kHz
Voltage Gain	114.32dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	18V
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Nominal Gain Bandwidth Product	85 kHz
Max I/O Voltage	10mV
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC27L4CN Overview

Op amp is packaged in 14-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. The linear amplifier should be run at 10V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. The input offset voltage is 10mV. For this electronic part, it is recommended that you mount it with type Through Hole. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 57μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 114.32dB for the time being. Op amp ic has 4 channels. The LinCMOS? indicates the series number of the op amp.