banner_page

TLC27L7IP

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 4V~16V ±2V~8V TLC27 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC27L7IP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 788
  • Description: 2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 4V~16V ±2V~8V TLC27 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position DUAL
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC27
Pin Count 8
Power Supplies 4/16V
Number of Channels 2
Operating Supply Current 29μA
Nominal Supply Current 46μA
Power Dissipation 1W
Slew Rate 0.05V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 4V~16V ±2V~8V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 500μV
Bandwidth 85 kHz
Gain Bandwidth Product 110kHz
Unity Gain BW-Nom 130 kHz
Voltage Gain 113.62dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 190μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 85 kHz
Max I/O Voltage 500μV
Input Offset Current-Max (IIO) 0.00006μA
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC27L7IP Overview


Op amp is packaged in 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 500μV. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 29μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 113.62dB. There are 2 channels on the operational amplifiers. In this case, LinCMOS? represents the instrumentation amplifiers' series number.

TLC27L7IP Features


8 Pins
supply voltage of 5V
113.62dB voltage gain

TLC27L7IP Applications


There are a lot of Texas Instruments TLC27L7IP Instrumentational OP Amps applications.

  • Fission chambers
  • Integrator circuits
  • Image computer boards
  • Automation control systems
  • Ultrasound transducers
  • Medical instruments
  • Non-polarized electrodes
  • Polarized electrodes
  • single/dual op amp sum and difference circuits
  • Communication device

Write a review

Note: HTML is not translated!
    Bad           Good