banner_page

TLC27M2AIDR

2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC27 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC27M2AIDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 953
  • Description: 2 Channels 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 4V~16V ±2V~8V TLC27 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC27
Pin Count 8
Power Supplies 5/10V
Number of Channels 2
Operating Supply Current 285μA
Nominal Supply Current 600μA
Power Dissipation 725mW
Slew Rate 0.62V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 4V~16V ±2V~8V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 5mV
Bandwidth 525 kHz
Gain Bandwidth Product 635kHz
Unity Gain BW-Nom 525 kHz
Voltage Gain 104.61dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 900μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 525 kHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)

TLC27M2AIDR Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. The input offset voltage is 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 285μA, this op amp ic can operate. There should be no change in the voltage gain at 104.61dB. There are a total of 2 channels available on the op amps. As a result of this, the buffer amplifier is packed in TR. As the name implies, LinCMOS? refers to the series of the buffer op amp.

TLC27M2AIDR Features


8 Pins
supply voltage of 5V
104.61dB voltage gain

TLC27M2AIDR Applications


There are a lot of Texas Instruments TLC27M2AIDR Instrumentational OP Amps applications.

  • Displayers for aircraft and air transportation control systems
  • Ultrasound transducers
  • Precision measurement
  • Professional videography
  • Division circuits
  • Image computer boards
  • Portable media players
  • Signal transformation
  • Addition operation circuits
  • Information processing

Write a review

Note: HTML is not translated!
    Bad           Good