Parameters |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
525 kHz |
Gain Bandwidth Product |
635kHz |
Unity Gain BW-Nom |
525 kHz |
Voltage Gain |
104.61dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
224μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
525 kHz |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC27 |
Pin Count |
8 |
Power Supplies |
5/10V |
Number of Channels |
2 |
Operating Supply Current |
285μA |
Nominal Supply Current |
600μA |
Power Dissipation |
725mW |
Slew Rate |
0.62V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
TLC27M2BCD Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThis op amp can operate from a supply current at 285μA. You should keep the voltage gain at 104.61dB for the time being. The op amp ic has 2 channels on it. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLC27M2BCD Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M2BCD Applications
There are a lot of Texas Instruments TLC27M2BCD Instrumentational OP Amps applications.
- Automatic control
- Inverse/same-phase proportional circuit
- Portable electronic products powered by batteries
- Gaming industry
- Micro signal measurement
- Proportional counter tubes
- Thermocouples
- Automotive sensors
- Test and measurement instruments
- High gain DC amplifier