Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC27 |
Pin Count |
8 |
Number of Elements |
2 |
Power Supplies |
5/10V |
Operating Supply Current |
285μA |
Nominal Supply Current |
600μA |
Power Dissipation |
725mW |
Slew Rate |
0.62V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
525 kHz |
Gain Bandwidth Product |
635kHz |
Unity Gain BW-Nom |
525 kHz |
Voltage Gain |
104.61dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
224μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
525 kHz |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC27M2BCDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . You can run this op amp ic on 285μA . You should keep the voltage gain at 104.61dB for the time being. The total number of elements in this buffer amplifier is 2. The linear amplifier is packaged by using a TR axis. Instrumentation amplifiers are numbered by their LinCMOS? series.
TLC27M2BCDR Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M2BCDR Applications
There are a lot of Texas Instruments TLC27M2BCDR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Strain gauges
- Semiconductor detectors
- Differentiator circuits
- Wireless base stations
- Proportional operation circuits
- Non-polarized electrodes
- E-book readers
- Weak signal detection
- Portable electronic products powered by batteries