Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC27 |
Pin Count |
8 |
Power Supplies |
5/10V |
Number of Channels |
2 |
Operating Supply Current |
285μA |
Nominal Supply Current |
600μA |
Power Dissipation |
1W |
Slew Rate |
0.62V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
525 kHz |
Gain Bandwidth Product |
635kHz |
Unity Gain BW-Nom |
525 kHz |
Voltage Gain |
104.61dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
224μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
525 kHz |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC27M2BCP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. For this electronic part, it is recommended that you mount it with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 285μA . It is recommended to keep the voltage gain at 104.61dB at all times. 2 channels are available on the instrumentation amplifier. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC27M2BCP Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M2BCP Applications
There are a lot of Texas Instruments TLC27M2BCP Instrumentational OP Amps applications.
- Precision measurement
- Home audio systems
- Wireless base stations
- Multiplication circuits
- Scintillation detectors
- Logarithmic operation circuits
- Power transmission
- Band-pass filter
- Non-polarized electrodes
- Exponential operation circuits