TLC27M4ACN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 5/10V |
| Operating Supply Current | 570μA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 1.575W |
| Slew Rate | 0.62V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 525 kHz |
| Gain Bandwidth Product | 635kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 525 kHz |
| Max I/O Voltage | 5mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27M4ACN Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 14 terminations this year. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. This electronic part is best mounted with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using an 570μA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 104.61dB. There are 4 elements in this buffer amplifier. The LinCMOS? indicates the series number of the op amp.
TLC27M4ACN Features
14 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M4ACN Applications
There are a lot of Texas Instruments TLC27M4ACN Instrumentational OP Amps applications.
- Band-pass filter
- Division circuits
- Instrumentation
- High gain DC amplifier
- Signal operation
- Navigation
- Vehicle electronics
- Image computer boards
- Switching amplifier
- Multimedia playback equipment
