TLC27M4BCDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 5/10V |
| Operating Supply Current | 570μA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 950mW |
| Slew Rate | 0.62V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 525 kHz |
| Gain Bandwidth Product | 635kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 525 kHz |
| Max I/O Voltage | 2mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27M4BCDR Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 2mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 570μA . Keeping the voltage gain at 104.61dB is the best course of action. There is a rating of 4 for the operating supply voltage of the buffer op amp. For packing the buffer amplifier, the TR-axis is adopted. The LinCMOS? stands for the buffer op amp's serial number.
TLC27M4BCDR Features
14 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M4BCDR Applications
There are a lot of Texas Instruments TLC27M4BCDR Instrumentational OP Amps applications.
- Non-polarized electrodes
- Fission chambers
- Oscilloscopes
- Band-pass filter
- Scintillation detectors
- Car stereo
- Semiconductor detectors
- Signal operation
- Communication
- Test equipment
