TLC27M4BIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC27 |
| Pin Count | 14 |
| Power Supplies | 5/10V |
| Number of Circuits | 4 |
| Operating Supply Current | 570μA |
| Nominal Supply Current | 1.2mA |
| Slew Rate | 0.62V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 260μV |
| Bandwidth | 525 kHz |
| Gain Bandwidth Product | 635kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 525 kHz |
| Max I/O Voltage | 2mV |
| Power | NO |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC27M4BIN Overview
There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 14 pins. In terms of input offset voltage, operational amplifier rates 260μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using a supply current of 570μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. A linear amplifier like this has 4 circuits on it. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLC27M4BIN Features
14 Pins
supply voltage of 5V
104.61dB voltage gain
TLC27M4BIN Applications
There are a lot of Texas Instruments TLC27M4BIN Instrumentational OP Amps applications.
- Switching amplifier
- Tablets
- Hand-held batteries
- Communication device
- Large motor controllers
- Navigation
- Proportional counter tubes
- Fast A/D and D/A converters
- Measurements of Wheatstone bridge
- Television
