TLC320AD50CDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC320 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 22.05 ksps |
| Voltage - Supply, Analog | 4.75V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 120mW |
| Signal to Noise Ratio (SNR) | 89 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 88 / 88 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 89 |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC320AD50CDW Overview
For space-saving reasons, it is supplied in a 28-SOIC (0.295, 7.50mm Width) package. It is adopted to package in the Tube way. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of General Purpose. The mounting type of this device is Surface Mount. At 0°C~70°C, it can operate normally. It is equipped with a total of 1 / 1 ADCs and DACs. There is a voltage supply of 4.75V~5.5V to the analog circuit. It receives a voltage of 4.5V~5.5V as its supply voltage. In order to avoid reflections off the end of the transmission line, 28 terminations are used. There are 28 pins on this device. It is configured with 28 pins. By using its base part number TLC320, you can find more related parts. Maintain a maximum voltage of 5.5V. At a minimum, the voltage should be kept at 4.5V. This device operates on 5V volts as its supply voltage. When the supply voltage is 5V, it can operate. For the conversion of digital signals into analog ones, 1 D/A converters are used. A total of 16 bits are provided for storing information. It is equipped with 2 analog inputs. There are 0 ADC channels which represent the number of analog values that can be read at the same time.
TLC320AD50CDW Features
Embedded in the 28-SOIC (0.295, 7.50mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
2 analog inputs
TLC320AD50CDW Applications
There are a lot of Texas Instruments TLC320AD50CDW CODECs Interface ICs applications.
- Multiplication
- Filling
- CPU memory location identification
- Converting
- Web tensioning
- Mobile equipement
- Sawmills
- Pulp & paper mills
- Code conversion
- Galvanometer scanners
