TLC320AD50CPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC320 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 22.05 ksps |
| Voltage - Supply, Analog | 4.75V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 120mW |
| Signal to Noise Ratio (SNR) | 89 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 88 / 88 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 89 |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC320AD50CPT Overview
For space-saving reasons, it is supplied in a 48-LQFP package. This package uses the Tray packaging method. This electronic part is categorized as a type of General Purpose, making it capable of providing high-efficiency performance in a variety of applications. The mounting type of this device is Surface Mount. A performance setting of 0°C~70°C allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. 4.75V~5.5V of supply voltage are applied to the analog circuit. A supply voltage of 4.5V~5.5V is applied to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. In electronic terms, it is a kind of 48-pin device. 48 pins are connected to it. Find more related parts by using its base part number TLC320. Ideally, the supply voltage should remain at 5.5V. At a minimum, the voltage should be kept at 4.5V. A voltage of 5V is required to operate the device. 5V is the supply voltage that it can operate from. For converting digital signals into analog signals, there are 1 D/A converters. An information storage system with 16 bits is provided. There are 2 analog inputs on it. ADC channels represent the number of analog values that can be read simultaneously.
TLC320AD50CPT Features
Embedded in the 48-LQFP package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
2 analog inputs
TLC320AD50CPT Applications
There are a lot of Texas Instruments TLC320AD50CPT CODECs Interface ICs applications.
- Dynamic applications
- Registration mark timing
- Automation
- Automatic health monitoring systems
- Web tensioning
- High-performance memory-decoding or data-routing applications
- Radiation therapy
- Feature extraction
- Position measurement
- Medical industry
