TLC320AD77CDB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC320 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of Bits | 24 |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Power Consumption | 160mW |
| Signal to Noise Ratio (SNR) | 100 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 100 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 100 / 100 |
| Height | 1.95mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC320AD77CDB Overview
Space-saving reasons have led to it being packaged in a 28-SSOP (0.209, 5.30mm Width) package. We have adopted the packaging method of Tube. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Stereo Audio. As a mounting type, it uses Surface Mount. When the operating performance is set to 0°C~70°C, the system can operate normally. The unit is integrated with 1 / 1 ADCs / DACs. An analog circuit is supplied with a voltage of 3V~3.6V. A 3V~3.6V supply voltage is applied to the digital circuit. To prevent signals from reflecting off of the transmission line, there are 28 terminations. The device has 28 pins. With 28 pins, it is configured. By using its base part number TLC320, you can find more related parts. It is recommended to maintain the maximum supply voltage at 3.6V. A part in this category is classified as subcategory Other Consumer ICs. Minimum supply voltage should remain at 3V. It can be operated from a voltage of 3.3V. Digital signals are converted into analog signals using 2 D/A converters. Information is stored using 24 bits.
TLC320AD77CDB Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
TLC320AD77CDB Applications
There are a lot of Texas Instruments TLC320AD77CDB CODECs Interface ICs applications.
- Automated Guided Vehicles (AGV)
- Robotic arm positioning
- Wire number reduction in a particular circuits
- Oil & gas production
- Converting
- Cut-to-length
- Switching function
- Missing value imputation
- Autonomous vehicles & robots
- Off-Highway Vehicles (OHV)
