TLC339CDBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
TLC339CDBRG4 Overview
The product is packaged in 14-SSOP (0.209, 5.30mm Width) in order to facilitate transportation.There is a CMOS, Open-Drain output type for this comparator.The chip is packaged with Tape & Reel (TR) .There are 14 terminals on the comparator.Electronic comparator is a part of Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.The pinout of the component starts from 14 pins it has.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .14 pins are present on the comparator.In order to find a solution that meets your specific needs, search TLC339 for more pin-to-pin solutions.This comparator presents a quiescent current of 100μA .A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 80μA .An excess of current supply over 80μA could result in malfunction of the comparator.This device requires 5V power supplies to operate.Electronic comparator is possible to input up to 5pA current into the device.A comparator part from the LinCMOS? series is used in this part.
TLC339CDBRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CDBRG4 Applications
There are a lot of Texas Instruments TLC339CDBRG4 linear comparators applications.
- General-Purpose Portable Devices
- Simple Analog-to-Digital Converters (ADCs)
- Motor drives
- Industrial
- High-Speed Differential Line Receiver
- Wearable Devices
- Wide Range VCO; MOS Clock Timers
- Power management
- Automatic Test Equipment
- Hand-Held Electronics
