Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Weight |
927.99329mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
1.15W |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLC339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Circuits |
4 |
Nominal Supply Current |
80μA |
Power Dissipation |
1.15W |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
100μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.000002μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
100μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC339CN Overview
To facilitate transportation, it comes packaged in 14-DIP (0.300, 7.62mm) .Output type CMOS, Open-Drain is used for this comparator.The part will be shipped by Tube .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .There are 14 pins on this board.Electronic comparator is recommended that the mounting type be Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 14 pins.Try search TLC339 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 100μA in this comparator.A Through Hole is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 80μA .A supply current exceeding 20μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.There is a maximum current that can be input into the device of 5pA .In this case, the part is from the LinCMOS? comparator series.For normal operation, the operating supply voltage must be 5V .
TLC339CN Features
CMOS, Open-Drain output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CN Applications
There are a lot of Texas Instruments TLC339CN linear comparators applications.
- Automotive
- Portable and Battery-Powered Systems
- General-Purpose Portable Devices
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators
- Ultra-Low Power Systems
- Notebooks and PDAs
- Point of load regulators
- Battery-Powered Electronics
- System control and monitoring