TLC339CNSG4

1 μs μs Linear Comparators 80μA μA 5mV mV Surface Mount

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC339CNSG4
Package: SOP
Datasheet: -
Stock: 941
Description: 1 μs μs Linear Comparators 80μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	SOP
Number of Pins	14
Weight	208.312296mg
Type	General Purpose
Max Operating Temperature	70°C
Min Operating Temperature	-55°C
Operating Supply Voltage	5V
Number of Elements	4
Number of Channels	4
Max Supply Voltage	16V
Min Supply Voltage	3V
Power Dissipation-Max	1.15W
Nominal Supply Current	80μA
Power Dissipation	1.15W
Max Supply Current	175μA
Current - Output	20mA
Propagation Delay	4.5 μs
Quiescent Current	100μA
Response Time	1 μs
Common Mode Rejection Ratio	84 dB
Current - Input Bias	5pA
Input Offset Voltage (Vos)	5mV
Power Supply Rejection Ratio (PSRR)	85dB
Max Input Current	5pA
Radiation Hardening	No
RoHS Status	RoHS Compliant

TLC339CNSG4 Overview

To facilitate transportation, it comes packaged in SOP .Electronic comparator is possible to classify the chip as General Purpose .A total of 4 elements can be found in it.The comparator has a pin count of 14 .There is a quiescent current of 100μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 80μA .If the current supply exceeds 175μA , the comparator could malfunction.You can input a maximum current of 5pA into this device.Temperature higher than 70°C is not recommended.Temperature lower than -55°C is not suitable for the it.The comparator has a maximum supply voltage of 16V .This comparator can be supplied with a voltage as low as 3V .For the output to be of high quality, 4 channels must cooperate together.The operating supply voltage for normal operation should be 5V .Comparator electronics has an output current rated at 20mA .