TLC339CNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1.15W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 1.15W |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339CNSR Overview
A convenient transport package is provided in 14-SOIC (0.209, 5.30mm Width) .The comparator has an output type of CMOS, Open-Drain .The chip is packaged with Tape & Reel (TR) .The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 4 elements in total.A total of 14 pins are included.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .There are 14 pins on the comparator.Search TLC339 to find more pin-to-pin solutions.A quiescent current of 100μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 80μA .If the current supply exceeds 80μA , the comparator could malfunction.The device can be operated with 5V power supplies.Input current to the device is limited to 5pA .The part is based on LinCMOS? .The normal operation of the system requires 5V operating voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLC339CNSR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CNSR Applications
There are a lot of Texas Instruments TLC339CNSR linear comparators applications.
- Battery management and protection
- Appliances
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- Factory automation & control
- Pulse, Squarewave, and Time Delay Generators
- Wide Range VCO; MOS Clock Timers
- Self-diagnostics
- Battery-Powered Electronics
- Industrial
