Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
700mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLC339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
700mW |
Output Current |
20mA |
Max Supply Current |
80μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
100μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.000002μA |
Supply Voltage Limit-Max |
18V |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
100μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC339CPW Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, Open-Drain output.The part is shipped by Tube .You can find 14 terminals of the comparator.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .There are a total of 4 elements in it.The device contains 14 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.14 pins are available on the comparator.Try search TLC339 to get more pin-to-pin solutions for your special needs.There is 100μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 80μA for normal use.The compartator could be damaged if the current supply exceeds 80μA .In order to run the device, there are only 5V power supplies required.Comparator electronics is part of the LinCMOS? comparator series.In order to operate normally, a supply voltage of 0 is required.
TLC339CPW Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CPW Applications
There are a lot of Texas Instruments TLC339CPW linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Motor drives
- Limit Comparators
- Appliances
- Security Detection Systems
- Infotainment and Clusters
- Mobile Phones
- Factory automation & control
- Portable and Battery-Powered Systems
- Self-diagnostics