TLC339CPWR
| Parameters | |
|---|---|
| Power Dissipation | 700mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
TLC339CPWR Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.As a result, it is designed with Cut Tape (CT) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 14 pins.You can search TLC339 if you are looking for more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 20μA .An excess of current supply over 20μA could result in malfunction of the comparator.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.The part belongs to the LinCMOS? series of comparator parts.In order to operate normally, a supply voltage of 0 is required.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC339CPWR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CPWR Applications
There are a lot of Texas Instruments TLC339CPWR linear comparators applications.
- Limit Comparators
- General Purpose Low Voltage Applications
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- Building automation
- Appliances
- System control and monitoring
- Mobile Phones
- Automatic Test Equipment
- Infotainment and Clusters
