TLC339ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339ID Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Drain output type for this comparator.This package has been designed with Tube .The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.This element consists of 4 elements in total.The device includes 14 pins.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has 14 pins.You may wish to search TLC339 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 125μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current of the device be 80μA .A current supply greater than 20μA may cause the comparator to malfunction.The device can be operated with 5V power supplies.In this case, the part is from the LinCMOS? comparator series.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
TLC339ID Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC339ID Applications
There are a lot of Texas Instruments TLC339ID linear comparators applications.
- Power Supervision
- Infotainment and Clusters
- Window Comparators
- General Purpose Low Voltage Applications
- Mobile Phones and Tablets
- Mobile Phones
- Hand-Held Electronics
- Notebooks and PDAs
- Current and voltage sensing
- Factory automation & control
