TLC339IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339IDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, Open-Drain output type.This chip is designed with the Cut Tape (CT) package.There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLC339 for more pin-to-pin solutions.There is 125μA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 80μA .An excess of current supply over 20μA could result in malfunction of the comparator.The device can be operated with 5V power supplies.Input current to the device cannot exceed 5pA .The part belongs to the LinCMOS? series of comparator parts.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Comparator electronics is acceptable to pack the device by TR .
TLC339IDR Features
CMOS, Open-Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC339IDR Applications
There are a lot of Texas Instruments TLC339IDR linear comparators applications.
- Wearable Devices
- General Purpose Low Voltage Applications
- Limit Comparators
- High-Speed Differential Line Receiver
- General-Purpose Portable Devices
- Power Supervision
- Industrial
- Automatic Test Equipment
- Battery-Powered Electronics
- Appliances
