Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
700mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLC339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
700mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
125μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.000002μA |
Power Supply Rejection Ratio (PSRR) |
84dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
125μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC339IPW Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Open-Drain output type.This package has been designed with Tube .The comparator has a total of 14 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.The pinout of the component starts from 14 pins it has.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC339 .This comparator presents a quiescent current of 125μA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .A current supply greater than 20μA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.Electronic comparator is possible to input up to 5pA current into the device.The part is based on LinCMOS? .For normal operation, there should be 5V operating supply voltage applied.
TLC339IPW Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC339IPW Applications
There are a lot of Texas Instruments TLC339IPW linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
- Battery management and protection
- High-Speed Sampling Circuits
- Mobile Phones and Tablets
- Portable and Battery-Powered Systems
- Analog front end
- Consumer Medical Electronics
- Window Comparators
- RC Timers