TLC339IPWR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 700mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
TLC339IPWR Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.As a result, it is designed with Tape & Reel (TR) package.The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.The pinout of the component starts from 14 pins it has.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 14 pins.Search TLC339 to find more pin-to-pin solutions.A quiescent current of 125μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 20μA supply current.A supply current exceeding 20μA may result in the comparator malfunctioning.In order to operate the device, 5V power supplies are sufficient.Input current to the device is limited to 5pA .The part is from LinCMOS? comparator series.Comparator electronics is necessary to have a voltage of 5V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC339IPWR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC339IPWR Applications
There are a lot of Texas Instruments TLC339IPWR linear comparators applications.
- Wireless Base Stations
- Alarm and Monitoring Circuits
- Security Detection Systems
- Body Control Modules
- Laptop Computers
- Portable Battery Monitoring
- RC Timers
- Metering Systems
- Infotainment & cluster
- General Purpose Low Voltage Applications
