Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
950mW |
Output Current |
20mA |
Max Supply Current |
80μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
175μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
4V~16V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.000002μA |
Supply Voltage Limit-Max |
18V |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
175μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC339MDG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type CMOS, Open-Drain is used for this comparator.As a result, it is designed with Tube package.As you can see, the comparator has14 terminals.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .The total number of elements is 4 .The device is equipped with 14 pins.The recommended mounting type is Surface Mount .A temperature setting of -55°C~125°C should be used for the operating temperature in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLC339 .The comparator presents a quiescent current of 175μA volts.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.This device requires 5V power supplies to operate.Comparator electronics is a comparator part from the LinCMOS? series.The operating supply voltage for normal operation should be 5V .The device is acceptable to pack by TR .
TLC339MDG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC339MDG4 Applications
There are a lot of Texas Instruments TLC339MDG4 linear comparators applications.
- Battery management and protection
- Point of load regulators
- Window Comparators, Multivibrators
- Automatic Test Equipment
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- Power Supervision
- Current and voltage sensing
- Window Comparators
- Metering Systems