TLC339MDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339MDRG4 Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain is used for this comparator.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .Currently, it consists of only 4 elements.The pinout of the component starts from 14 pins it has.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -55°C~125°C to prevent malfunctions.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC339 .In this comparator, the quiescent current is 175μA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 80μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 80μA .In order to operate the device, 5V power supplies are sufficient.Input current to the device is limited to 5pA .The part is based on LinCMOS? .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.This device is usually used in ADC circuits (packaged in TR ).
TLC339MDRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC339MDRG4 Applications
There are a lot of Texas Instruments TLC339MDRG4 linear comparators applications.
- Handheld Instruments
- Hand-Held Electronics
- Factory automation & control
- Alarm and Monitoring Circuits
- Window Comparators, Multivibrators
- Wearable Devices
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Automotive
- Pulse, Squarewave, and Time Delay Generators
