TLC339MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.15W |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 1.15W |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339MN Overview
For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .The comparator has an output type of CMOS, Open-Drain .The part is shipped by Tube .As you can see, the comparator has14 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 4 elements in total.The device contains 14 pins.Electronic comparator is recommended that the mounting type be Through Hole .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .14 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLC339 .As a result, this comparator displays a quiescent current of 175μA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 80μA .A current supply greater than 80μA may cause the comparator to malfunction.The device can be run with 5V power supplies.The part is based on LinCMOS? .Comparator electronics is necessary to have a voltage of 5V for normal operation.
TLC339MN Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC339MN Applications
There are a lot of Texas Instruments TLC339MN linear comparators applications.
- Zero-Crossing Detectors
- Mobile Phones and Tablets
- Building automation
- Body Control Modules
- Simple Analog-to-Digital Converters (ADCs)
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Point of load regulators
- Security Detection Systems
- Handheld Instruments
