TLC352CDR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 150μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
TLC352CDR Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, MOS, Open-Drain, TTL .This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.Search TLC352 to find more pin-to-pin solutions.There is a quiescent current of 400μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 150μA .A current supply greater than 150μA may cause the comparator to malfunction.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.Comparator electronics is part of the LinCMOS? comparator series.Comparator electronics is acceptable to pack the device by TR .
TLC352CDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC352CDR Applications
There are a lot of Texas Instruments TLC352CDR linear comparators applications.
- Security Detection Systems
- Appliances
- Handheld Instruments
- Alarm and Monitoring Circuits
- Automotive
- Battery-Powered Electronics
- Current and voltage sensing
- Multivibrators and High-Voltage Digital Logic Gates
- General Purpose Low Voltage Applications
- High-Speed Sampling Circuits
