TLC352CDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 150μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Max Input Current | 5pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC352CDRG4 Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical Differential .This is a 2 element comparator.The board includes 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator is equipped with 8 pins.Search TLC352 to find more pin-to-pin solutions.The comparator presents a quiescent current of 400μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 150μA supply current.A current supply greater than 150μA may cause the comparator to malfunction.This device requires 5V power supplies to operate.Input current to the device is limited to 5pA .Comparator electronics is a comparator part from the LinCMOS? series.This device is usually used in ADC circuits (packaged in TR ).
TLC352CDRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC352CDRG4 Applications
There are a lot of Texas Instruments TLC352CDRG4 linear comparators applications.
- Factory automation & control
- Window Comparators
- High-Speed Sampling Circuits
- Mobile Phones
- RC Timers
- Battery-Powered Electronics
- Battery-Powered Electronics
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
- Window Comparators, Multivibrators
