TLC352CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC352CP Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.This chip is designed with the Tube package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type Differential .A total of 8 pins are included.A Through Hole mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC352 .A quiescent current of 400μA is observed in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 300μA .A supply current exceeding 300μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input up to 5pA current into the device.Comparator electronics comes from the series of LinCMOS? comparator parts.
TLC352CP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC352CP Applications
There are a lot of Texas Instruments TLC352CP linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
- Battery management and protection
- Window Comparators
- Mobile Communications
- Hand-Held Electronics
- Building automation
- RC Timers
- High-Speed Differential Line Receiver
- Threshold Detectors
