TLC352IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC352IDG4 Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.This package has been designed with Tube .The device is designed with 8 terminations.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical Differential comparator.There are a total of 2 elements in it.The device is equipped with 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator has 8 pins.Alternatively, you may search for TLC352 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 400μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 300μA .If the current supply exceeds 300μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.The part belongs to the LinCMOS? series of comparator parts.Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.
TLC352IDG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC352IDG4 Applications
There are a lot of Texas Instruments TLC352IDG4 linear comparators applications.
- Handheld Instruments
- Window Comparators, Multivibrators
- Metering Systems
- Portable Battery Monitoring
- Motor drives
- Building automation
- Wide Range VCO; MOS Clock Timers
- Industrial
- High-Speed Sampling Circuits
- DC/DC and AC/DC power supplies
